Food Science · Meat

Who Makes 3D Printed Meat? The Companies Behind It, and How They Differ From Lab-Grown Meat Firms

The short answer

Three companies make nearly all of the 3D printed meat you can actually buy: Steakholder Foods, which sells the Perfecta range in the north-eastern US, Redefine Meat, which sells in European restaurants and UK supermarkets, and Novameat in Spain. All three print plant protein. None of them sells lab-grown meat. The lab-grown companies, such as UPSIDE Foods, GOOD Meat, Aleph Farms and Vow, grow real animal cells and are a separate industry, with almost nothing in shops.

The 3D printed meat on sale today comes from a short list of companies, and the one thing they have in common is that they are printing plants, not animal cells. Here is who they are, what each one sells and where, and how they differ from the lab-grown meat firms they keep getting confused with.

A stack of three raw plant-based burger patties on baking paper on a blue plate, with soybeans scattered around and a lightbox sign reading Plant Based Meat behind them

Who makes the 3D printed meat you can buy?

CompanyBased inWhat it printsWhere you can buy it
Steakholder Foods (Perfecta)Rehovot, IsraelPlant-based steak, filet, chicken breast and fish patties from soy and wheat proteinNatural and specialty grocers in the north-eastern US, since September 2026
Redefine MeatRehovot, IsraelPlant-based flank steak, lamb cuts, mince, pulled meats and sausagesRestaurants across Europe and Israel; Asda and Ocado in the UK; Albert Heijn in the Netherlands; Coop in Switzerland
NovameatBarcelona, SpainPlant-based whole cuts, shredded beef, pulled pork, lamb and chicken from pea proteinRestaurants, caterers and distributors in Spain, the UK and the Netherlands

All three sell to other businesses as much as to shoppers: Steakholder sells printers and “ink” premixes to food makers, and Novameat’s main customers are distributors and caterers.

What does Steakholder Foods make?

Steakholder Foods is the company behind Perfecta, the only 3D printed whole cut on US supermarket shelves. It was founded in 2019 in Rehovot, Israel, as MeaTech 3D, and changed its name to Steakholder Foods in 2022 (Meat+Poultry). It is listed on the Nasdaq under the ticker STKH.

It started out as a cultivated meat company, aiming to print real steak from animal cells, and in 2023 it showed a 3D printed fish fillet made with cultivated grouper cells from Umami Meats (CNN). None of that is for sale. The company’s own explanation is that cultivated cells are not yet ready for commercial production, so its inks are plant-based for now, with the option to add cultivated cells later if the economics work (Green Queen). That history is why some fact checks describe Steakholder as a company that “cultivates cells” (Snopes). It does, in the lab. What it sells is plants.

Its business runs on two tracks. One is selling industrial printers and ready-made premix powders to other food companies, with blends for beef steak, white fish, salmon, shrimp and eel (Steakholder Foods). The other is its own consumer brand. Perfecta’s plant-based seafood went on sale in Israel first, then the five-product US range launched through the distributor KeHE on 3 September 2026 (GlobeNewswire). The company has not named the stores. What is in those products, ingredient by ingredient, is in Perfecta 3D printed steak: what’s in it, and the store question is answered in where to buy 3D printed meat.

It is a small company: revenue so far is close to zero and it has run at a loss since listing, which is worth knowing when a headline calls it an industry.

Not ready for a trial? Join the free MindShift Mentors newsletter instead.

No credit card required. Then $29.95 AUD a month or $299 AUD a year. Results vary. Designed to work alongside professional care, not replace it.

What does Redefine Meat make?

Redefine Meat is the biggest of the three by reach. Also based in Rehovot, Israel, it was the first to put a 3D printed plant-based whole cut on restaurant menus, launching in 2021 in the UK, Germany, the Netherlands and Israel, including Marco Pierre White’s steakhouses in Britain (The Times of Israel). It raised US$135 million in 2022 to build production lines in Israel and the Netherlands (The Times of Israel), and a 2023 partnership with the meat distributor Giraudi took it into France, Italy, Greece and Sweden (Reuters).

Its products are sold as “New-Meat”: a flank steak, lamb and beef cuts, mince, pulled products and sausages. The flank steak is the flagship. In October 2025 it reached a mainstream UK supermarket for the first time, with seven products listed at Asda, and a reformulated flank steak followed in 2026 at Asda and Ocado at £7.97 for 200 g (The Grocer). It is also in Albert Heijn in the Netherlands and Coop in Switzerland, and it keeps adding restaurant chains in German-speaking Europe (vegconomist).

The company confirmed to The Vegetarian Resource Group in August 2026 that its products are made from plant ingredients, are vegan, and involve no animal genes and no cell culture (VRG).

Redefine Meat does not sell in the US or Australia.

What does Novameat make?

Novameat is the Spanish one. Founded in Barcelona in 2018 by the bioengineer Giuseppe Scionti, it made its name with 3D printed plant-based steaks, then shifted to products it could make at volume: shredded beef, pulled pork, lamb and chicken from pea protein (Green Queen). It raised about US$19 million in a Series A round in September 2024 (Green Queen).

Worth knowing: Novameat’s volume products are no longer made on a printer in the ordinary sense. The company has said it now uses standard food-industry machinery with its own patented modifications to get the same fibrous texture, and in a February 2026 interview Scionti described its texturising line turning out one and a half tonnes of pea protein an hour (i-mas). Its customers are food-service distributors, caterers and restaurants in Spain, the UK and the Netherlands, including Barcelona’s Disfrutar. Its products are soy free and gluten free, which sets them apart from Perfecta.

So of the three, one has moved past printing, one prints in Israel and the Netherlands for restaurants and a handful of European supermarkets, and one has just started selling printed whole cuts to US shoppers.

How are 3D printed meat companies different from lab-grown meat companies?

Completely different product, often confused because both get called “fake meat” and because one company, Steakholder, has a foot in each camp.

A 3D printed meat company shapes plant protein. Its food is regulated like any packaged food and needs no special approval. A lab-grown, or cultivated, meat company grows real animal cells in steel tanks. Its food is real meat, it is not vegan, and it needs a pre-market safety review in every country before it can be sold. We set the two side by side in 3D printed vs lab-grown vs plant-based meat.

Here is where the main cultivated companies stand, as far as public reporting shows in late 2026:

CompanyBased inProductStatus
UPSIDE FoodsCalifornia, USCultivated chickenUS clearance in 2022 and 2023. Lost its appeal against Florida’s state ban in March 2026; the wider case continues
GOOD Meat (Eat Just)California, USCultivated chickenFirst in the world to be approved, in Singapore in 2020. US clearance in 2023. Very small volumes
Aleph FarmsRehovot, IsraelCultivated beef, blended with plant proteinApproved in Israel in December 2023, the first cultivated beef anywhere. Reports in August 2026 said Singapore had followed. Not yet on sale in either
VowSydney, AustraliaCultivated quailApproved in Singapore, and by Food Standards Australia New Zealand in 2025. Served in a small number of restaurants
Mission BarnsCalifornia, USCultivated pork fatUS clearance in 2025. Sold in tiny quantities
WildtypeCalifornia, USCultivated salmonUS clearance in 2025. A few restaurants
Believer MeatsIsrael and North Carolina, USCultivated chickenReceived US approval in 2025, then ceased operations in December 2025 with its new plant never having produced for sale

The pattern across that table is the point. By 2026 close to a dozen cultivated products had been approved somewhere in the world and none was selling at scale (Cultivated X). Believer Meats, which had US approval and a US$150 million factory, shut down in December 2025 after running out of cash, and UPSIDE later walked away from a bid for the empty plant (Meat+Poultry, Green Queen). Seven US states have banned cultivated meat outright, and a federal appeals court upheld Florida’s ban in March 2026 (Regulatory Oversight).

So if you are standing in a US supermarket holding a 3D printed steak, it came from Steakholder Foods and it is plant-based. No cultivated meat company has a product in any US grocery chain. The ways to tell the two apart on a pack are in how to tell if meat is 3D printed, plant-based or lab-grown.

Why are so many of these companies in Israel?

Two of the three printing companies and two of the cultivated companies above are based in or around Rehovot, a city south of Tel Aviv with a cluster of agricultural and food science research institutes. Israel has had an active food-technology sector for a decade, with research funding and a regulator that approved Aleph Farms’ cultivated beef before any other country had cleared beef. That is the explanation the public record offers: a research cluster, early investment and an early approval. Novameat is Spanish, the cultivated chicken companies are mostly Californian and Vow is Australian. Italy banned cultivated meat in 2023, which we cover in did Italy ban Bill Gates’ lab-grown meat?

Common questions

Who makes Perfecta 3D printed meat?

Steakholder Foods, a Nasdaq-listed company based in Rehovot, Israel, founded in 2019 as MeaTech 3D. Perfecta is its consumer brand and is plant-based.

Is 3D printed meat made by the same companies as lab-grown meat?

Mostly not. Redefine Meat and Novameat have never sold cultivated meat. Steakholder Foods researches cultivated cells but everything it sells is plant-based.

Which 3D printed meat company is the biggest?

By reach, Redefine Meat, which is in restaurants across Europe and in supermarkets in the UK, the Netherlands and Switzerland. Steakholder Foods is the only one selling 3D printed whole cuts in US stores.

Is any 3D printed meat sold in Australia?

Not that we could find. None of the three companies lists an Australian retailer or distributor, and no 3D printed meat has been announced for sale here. The only cultivated product approved in Australia is Vow’s quail, and it is served in a few restaurants.

Can I buy lab-grown meat in a supermarket?

Not in any mainstream US, UK or Australian supermarket as of late 2026. The handful of cultivated products on sale are in restaurants, in very small amounts.

The bottom line

The 3D printed meat industry, as something you can buy, is three companies, two Israeli and one Spanish, and all three print plants. The lab-grown meat industry is a separate set of companies that grow animal cells, and despite a string of approvals it has almost nothing in shops and has already lost one of its best-funded names. If a headline merges the two, that is the first sign to read it slowly.

Read next: 3D printed meat: the plain-English guide, Perfecta 3D printed steak: what’s in it, Is 3D printed meat being sold in US supermarkets? and What does 3D printed steak taste like?

Sources

  1. Steakholder Foods Launches Perfecta at Retail Outlets Across the Northeastern U.S., GlobeNewswire, 3 September 2026
  2. MeaTech 3D now Steakholder Foods, Meat+Poultry
  3. Beef steak premix blend, Steakholder Foods
  4. Steakholder Foods and Umami Meats have teamed up to create the world's first 3D-printed cultivated fish fillet, CNN
  5. Steakholder Foods' 3D-Printed Plant-Based Seafood Makes Retail Debut in Israel, Green Queen
  6. Steakholder Foods Rolls Out 3D-Printed Whole-Cut Meat at US Supermarkets, Green Queen
  7. Israel's Redefine Meat to serve 3D-printed, plant-based meat at eateries in Europe, The Times of Israel
  8. Israeli developer of 3D-printed plant-based meat pulls in $135 million, The Times of Israel
  9. Redefine Meat strikes partnership to boost 3D-printed meat sales in Europe, Reuters, via Investing.com
  10. Redefine Meat secures first bricks and mortar listing with Asda, The Grocer
  11. 'Upgraded': Redefine Flank Steak to launch into Asda and Ocado, The Grocer
  12. Redefine Meat Expands Successful Partnership with Concept Family Franchise AG, vegconomist
  13. Redefine Meat is vegan, The Vegetarian Resource Group, August 2026
  14. Novameat Nabs $19.2M in Series A, Revamps Plant-Based Shredded Beef, Green Queen
  15. Novameat Leans Into Clean-Label Demand with Plant-Based Pulled Pork and Lamb, Green Queen
  16. Plant-based meat and 3D printing: how Novameat went from prototype to factory, i-mas, February 2026
  17. Cultivated Meat in 2026: Close to a Dozen Approvals, None Yet Selling at Scale, Cultivated X
  18. Where countries stand on cultivated meat regulation in 2026, FoodNavigator, February 2026
  19. Cultivated Meat Outlook: 10 Leading CEOs Lay Out Their Plans for 2026, Green Queen
  20. Eleventh Circuit Upholds Florida's Lab-Grown Meat Ban Against Preemption Challenge, Regulatory Oversight (Troutman Pepper Locke), March 2026
  21. Believer Meats abruptly shuts down operations, Meat+Poultry
  22. Upside Foods Withdraws $50M Bid for Believer Meats' Cultivated Meat Facility, Green Queen
  23. Are US stores selling 3D-printed meat?, Snopes

Related

Start with the guide: 3D printed meat: the plain-English guide

Also on Cuisine Seeker: Why do I crave sugar at night?

Not ready for a trial? Join the free MindShift Mentors newsletter instead.

No credit card required. Then $29.95 AUD a month or $299 AUD a year. Results vary. Designed to work alongside professional care, not replace it.